VBRM601YCM Software Updates

To make sure your LawnMaster OcuMow™ is performing it's best, you may need to update the software occasionally. We suggest checking here every few months to make sure you have the latest software installed.

Note: Make sure your USB flash drive is working normally and the robotic mower is switched on by pressing the START/ON button for 1 second before updating. Make sure the battery indicator is green and the mower has sufficient power for updating software.

How to Install:

1. Download the robotic mower's latest software from our website onto a blank USB flash drive.
2. Stop the mower and remove the safety key.
3. Turn the mower upside-down. Wear protective gloves and open the USB port rubber cap to reveal the USB port.
4. Insert the safety key. Unlock the mower if the mower is locked.
5. Press the START/ON button for 1 second and then wait for 15 seconds until the robotic mower is powered on completely (indicated by a green battery light and beep).
6. After the software update is complete, you will hear continuous beeping and the battery indicator will flash green continuously.
7. Remove the USB flash drive. Replace the USB port rubber cap. To complete the software update, restart the machine by removing and reinserting the safey key.